As we all know that some of the Nokia mobile phone both Nokia s40 java phone and also with Nokia s60 Symbian phone get some little problems, the some of this problem is viruses attack.
This Tutorial will take you through how you can format your Nokia Phones be it Symbian or java with Phoenix service software using your original Nokia USB Data cable.
Flashing Nokia PHONES may affect your language depending on the firmware you downloaded e.g if your default firmware is Europe English and you download that of Asia, you may see changes in Language change- or product code change.
NOTE : Be prepared to do this at your own risk but dont worry nothing will be happen you'll get success. However nobody will follow this tutorial and have any problem.The reason is this topic has been tested and it is trusted i have flashed my Nokia N97 and Nokia E6 together with Nokia-2700c severally with phoenix service software without any problem.
Some Tools Require you need Download before you begin:
Download Navifirm from here
Size : 674KB
Download Phoenix Service Software Here
Size : 153MB
NOTE : Also if you dont have the flash files of the phone that you want flash on your computer you must download the RM from this link below :
Download All Nokia Flashing Files HERE
After downloading all the required tools above you can now read on to complete the following process in other to flash your dead Nokia phone.
Now The Procedures will Start now :
1. First remove the cable from the phone and make sure it is turned off. If it is necessary, remove and insert the battery of the phone you want flash.
2. Run Phoenix Service Software as administrator. (Windows Vista, 7: right click -> run as administrator; XP: login with administrator privileges). Select “NO CONNECTION” as your connection type
3. Then Select “Open Product” option in “File” menu look at the picture below.
4. A window will pop-up, select the mobile phone that you want to flash. Then product code of the mobile phone is on the sticker under the battery. (Usually RM-xxx)
5. Now Select “Firmware Update” option in “Flashing” menu.
6. Press “…” button on the top-right corner of the window to select the language pack / product code You want to flash on phone.
7. Now select the product code / language pack You want to flash on phone, and press OK button see the screenshot below.
8. Tick Dead phone USB flashing like you see in the below image.
9. Then scroll down and click on “Update Software” to start the firmware update procedure.
10. Follow the instructions: (if that method doesn’t work, press OK, then press power on button on phone and right after connect the usb cable)
11. Phone firmware update process should start immediatly.
12. When the update process finished, a window will appear: “Firmware updating succeded.”
13. You Can now remove your phone from cable, and try to turn it on. It may happen that the phone doesn’t turn on. Hardware error, firmware downgrade or bad certificate could cause that problem.
Also If you encountered any problem in the course of your flashing the phone, please drop your comment here and we should help you for solving the problem.
Special Thanks to LemmyMobile Where I get this experiency.
